Acrylic
ABOUT
EVERYTHING

Plexiglass, chemical name PMMA (polymethyl methacrylate)It is a transparent engineering plastic. glass approx. weighs half and is 10–17 times more resistant to impact than glass. It does not break into sharp pieces like glass when dropped or hit; This feature provides a great advantage in terms of security.

Light transmittance (92%) is close to glass and even superior in many applications. It can be cut with laser, shaped by heating and UV printing can be applied to its surface. It replaces glass in advertising, decoration, industrial and marine applications.

Cast plexiglass: It is produced by pouring it into a mold between two glass sheets. Since its molecular structure is homogeneous, it gives a smooth, bright edge in laser cutting; It is more suitable for thermoforming. It is preferred for high quality applications.

Extrusion plexi: It is produced by passing it through rolling rollers in molten form. It is more economical; However, the edge quality after laser cutting is not as perfect as cast. It is used in large surface, budget-oriented works.

Plexiglass is usually 2mm ile 20mm Available in various thicknesses between:

• 2–3 mm: Brochure holder, thin decoration panel, picture holder
• 4–6 mm: Small boxes, name tags, stand tops
• 8–12 mm: Lectern, big boxes, safety glass applications
• 15–20 mm: Machinery covers, boat/yacht glass, structural parts

You can contact us by specifying your application for the most suitable thickness.

Plexiglas; transparent, white matte, black matte, colored transparent (red, blue, yellow, green etc.), mirror surface and frosted (satiné) It is available in many color and surface options. You can contact us for color and surface selection according to the project needs.

Yes. Quality cast plexiglass, High resistance to UV rays and weather conditions shows; It does not turn yellow or become brittle. This feature makes it the preferred choice to replace glass in exterior, outdoor signage and advertising applications. Yellowing may occur over time in cheap extruded plexiglasses; Cast quality is recommended for long-lasting outdoor work.

Laser cuttingCuts the material by vaporizing it with heat energy. The result: very fine, shiny and smooth edges; There are no burn marks. Ideal for small details, text cuts and curved forms.

MillingIt shapes by removing chips with a rotary cutting edge. It is preferred for thicker materials and large pieces; edge width is greater than laser.

Frontal Plexi incorporates both methods; Together we can determine the most suitable method for your project.

UV printing, ink Instantly cured with ultraviolet light It is a digital printing method where it adheres to the surface. Its difference from traditional printing: since there is no intermediate drying phase, the printing is completed much faster and the ink adheres to the surface more strongly.

The result: a high-resolution print that resists fading, scratching and moisture. It is applied in signs, stands, brochures, decorative panels and corporate identity products. photo quality Even images can be printed on the plexiglass surface.

Plexiglass blow molding (vacuum thermoforming), plexiglass sheet 115–125°C'ye It is a production method based on softening the material by heating it to a certain temperature and then taking the shape of the underlying 3D mold with a vacuum pump.

Önal Plexi has a special oven and blow molding machine. With this method bell jar, specially shaped box, showcase decoration and industrial cap production is carried out. Production is possible in any desired size, thickness and shape.

Plexiglass bonding special acrylic adhesive based on dichloromethane (MC) is used. This adhesive chemically bonds two plexi surfaces, providing almost one-piece strength. For correct application, the surfaces must be clean, free of dust and oil.

It is possible to achieve transparent and invisible bonding. Classic adhesives (super glue, silicone) are not suitable for plexiglass; It causes yellowing and poor adhesion problems.

Plexiglass cleaning soft microfiber cloth and warm soapy water should be used. Solvents such as acetone, gasoline and thinner dull the surface; should not be used. Wiping with a dry cloth creates static electricity and attracts dust; Wet cleaning should be preferred.

Superficial scratches Special acrylic polishing paste or T-Cut type products can be used for; Scratches can be largely removed by polishing with a rotary machine. Deep scratches can be reduced by sanding + polishing, but cannot be completely removed.

Yes. Frontal Plexi, suitable for marine use It manufactures plexiglass glass in special forms and sizes. You can contact us by specifying the dimensions and technical drawings for cabin window, deck glass, bridge glass and interior partition applications.

In marine applications 10–20mm thickness and casting quality is recommended.

safety mirrors, with convex surface are mirrors; It eliminates blind spots by providing wide-angle vision. Areas of use:

• Market and shopping mall corridors
• Car park exits and road junctions
• Warehouse and factory corners
• Bank, school, hospital corridors

In some areas within the scope of occupational safety legislation compulsory is kept. Önal Plexi produces safety mirrors in different diameters.

Plexiglass podium; conference, seminar, graduation ceremony, wedding, award ceremony, congress and corporate events It is preferred for. Thanks to its transparent structure, it highlights the user and makes the scene appear visually light and stylish.

Over logo, corporate identity or event name UV printing applicable. Production is made in special sizes and designs.

Plexiglass machine covers, moving parts of industrial machines It is used for protection. It is transparent, allowing the operator to see the process while the machine is closing its interior; This is advantageous in terms of occupational safety and provides ease of maintenance.

CNC is widely used in textile, food processing and packaging machinery. Frontal Plexi, with special size and hinge-lock arrangement The machine produces covers.

Plexiglass product stands, thanks to their transparent structure highlights the product; The stand itself does not create visual noise. This feature is preferred in cosmetics, perfumery, jewelry and electronic sales points.

Compared to wood and metal alternatives lightweight, hygienic and easy to clean. Brand logo and product information can be applied to the surface with UV printing; This is a significant advantage for the corporate appearance.

Yes, production is made according to completely special sizes and designs. singular order It is accepted; There is no minimum quantity requirement. Special quantity-based pricing applies for corporate and bulk orders.

By preparing the size, thickness, color and design file (PDF, DXF, AI) if available for your order +90 (212) 243 06 31 You can call or contact form You can fill it out.

There are two ways:

1. Smart Price Calculation: onalpleksi.com/akilli-fiyat-hesaplama/ Go to and enter measurement and material information; You can instantly calculate the estimated price.

2. Direct Communication: For complex or special projects +90 (212) 243 06 31 call or I bilgi@onalpleksi.co Send an e-mail to . Working hours: Monday–Saturday, 07:30–20:30.

Production time varies depending on the complexity and quantity of the project. General guide:

• Simple cutting operations (flat laser cutting): same day or 1 business day
• standard products (brochure, name tag, box): 1–3 business days
• UV printed products: 2–4 business days
• Complex blow molding or special form: 3–7 business days

For urgent ordering, please contact us directly.

for laser cutting In DXF, AI or PDF vector format Technical drawing is preferred. However, it is sufficient to just describe your measurements and the form you want; Technical drawing suitable for production can be prepared by us.

for UV printing high resolution image (min. 300 DPI) or simply send a vector file (AI, EPS, PDF).

Address: Muratpaşa Mahallesi, Demirhisar Caddesi, Eski Edirne Asfaltı, Baltaş Kilimci İş Merkezi No:196 D:197, 34040 Bayrampaşa / İstanbul

Transport: Walking distance from Bayrampaşa–Kocatepe metro station. It can also be reached by bus lines on the Old Edirne Asphalt.

Phone: +90 (212) 243 06 31
E-mail: I bilgi@onalpleksi.co
Working hours: Monday–Saturday, 07:30–20:30

View on Google Maps →

Although the service is mainly provided domestically, it is also possible to send products abroad by cargo. For international shipping conditions and costs, please +90 (212) 243 06 31 call or I bilgi@onalpleksi.co Write to the address.