Plexiglass is a more cost-effective and durable alternative to glass in many areas than clear and rigid acrylic. If you learn how to cut plexiglass, the process becomes easier and cleaner. Plexiglass can be more difficult to cut than glass. Proper cutting techniques require the use of appropriate blades.
You can read 1 full plexiglass cut in our article.
Although plexiglass is easier to cut to size, it can leave a rough texture after cutting. If the material at hand has a smooth edge, correction should be made after cutting. Care should be taken not to damage the surface during this process.
Vehicles
- glass cutters
- circular saws
- circle knives
4. Pen
- Ruler
- Sandpaper
- sandpapers
- handcuffs
Cutting plexiglass at home - Collecting tools and equipment
Want to cut plexiglass at home? In addition to the tools listed for this section, you will also need
1 – utility knife
2 – drill
3 – protective glasses
- polisher
5 – spray bottle
- Preparing the work surface
Before cutting Plexiglas, there is no need to remove the protective film on it before the process is completed. This way, the plexiglass in your hand will not be scratched.
Plexiglass should be placed on a flat, scratch-proof surface and care should be taken not to break it. - Adjust the plexiglass according to the cutting size
Mark the size of the piece to be cut with a tape measure or meter.
Use a pencil and ruler to connect the lines and mark the line along the way.
4. Use Plexiglas sheet
Use gloves and protective glasses. Foreground Plexi During the operation, the edges may cut the hand or the resulting fragments may splash into the eyes.
To cut, use a circular saw or table saw with a thin blade and transverse teeth. Cut carefully along the cutting line and be careful at low speed.
Plexiglass must be repaired to prevent it from breaking again.
Use the rough side of a glass cutter or knife to mark.
Turn and cut to the opposite side.
Then press down to cut the dotted line.
5- Edge cleaning.
Keep the material firm by running the saw at low speed and pouring water over the cut. There may be wear due to heating.
Wet sand uneven edges with 120 Fortitude sandpaper.
After leveling, sand finely with 600 Fortitude sandpaper.
Once you have the edge you want, polish the edges with the backed machine drill.
If possible, you can also polish with a light oxygen flame. But be careful not to get burned.
Using liquid polish while polishing the drill will make your job easier.
How to cut plexiglass at home?
Therefore, the answers to the question “Cutting plexiglass at home” are given above. Foreground plexi You can contact us for a more comfortable and smooth cutting. We serve our valued customers with our professional team and modern machines.
Hard UV printing
